Connected Device is not a terminal-payment pairing screen. It launches CentriDisplay Customer Display or Barcode Scanner, both backed by the register’s active customer-display session service. The register must be open to create a PIN. A four-digit PIN/QR is short-lived pairing authority: keep it within sight of the intended device and confirm the recognizable device name/ID at the POS. Installed devices retain trusted pairing for automatic reconnection to their checkout host; Temporary joins are session-oriented. Barcode scans add immediately to the live Sell cart, so test with a controlled item and remove it afterward.

Before you beginUse only branded pos.getcentri.com links supplied by CentriPOS and confirm the link belongs to the intended merchant and transaction.

Step by step

  1. On the POS host, confirm the intended business, location, register, active session, and empty/safe Sell cart. Open the Customer Display monitor control in the operating-context bar. If the register is closed, the control is unavailable and says to open the register first.
  2. Read Customer Display status before creating anything. Connected means at least one live trusted/joined device is attached; Pending install needs POS approval; Disconnected has no active display; Error means the status service could not be read. Refresh status once before assuming the device is gone.
  3. Choose Installed for a dedicated display/scanner that should retain trust and reconnect automatically with its checkout host. Choose Temp for a spare phone/tablet or one-time join. Switching modes changes the type requested for the next PIN/URL; it does not transform an existing connected device.
  4. Generate or refresh the four-digit Connect PIN. The POS also shows a QR encoding the branded https://pos.getcentri.com/customer-display URL with pin and installed/temporary mode. Copy URL only to the device being paired. New PIN requests replace/refresh the pending code; do not publish it.
  5. On the companion phone/tablet/PAX browser, open https://pos.getcentri.com/device. Choose Customer Display to show live cart, customer-facing terms/signature/checkout QR, or Barcode Scanner to send product scans into the connected register. This launcher selection sets the device surface; it does not select the store/register itself.
  6. Enter a recognizable Display Name, up to 40 characters, such as Front Counter iPad or Front Counter Scanner. The page also shows a device-ID suffix. On a shared network, use both name and ID when approving so a nearby unknown device cannot claim the PIN.
  7. Choose Install on this checkout or Temporary join to match the POS mode, then enter the four digits and choose Install/Connect. Alternatively choose Scan Pairing QR Code and scan the POS QR; pasted pairing URL or plain four-digit PIN is also parsed by the scanner dialog. Reject any value that says it is not a CentriDisplay pairing code.
  8. Wait on Waiting for Approval. The device is pending and cannot view the live sale yet. Return to the POS, verify the requested device name, fingerprint/ID, and connection type, then choose Confirm Install or Confirm Join. Never approve an unexpected request.
  9. Wait for Customer display installed or Customer display joined on the POS. On the device, installed mode can show Customer Display Ready while waiting for the trusted checkout host/register to become active; temporary mode connects to the approved current session. Use Check Again/Retry or one status refresh rather than generating repeated codes.
  10. For Customer Display, verify the real store branding and register name, then the Waiting for your associate to start a sale ready state. Add one controlled non-sensitive cart item and verify live item/total/customer display behavior. Do not expose a real customer while testing. Remove/clear the test cart and confirm the display returns to ready.
  11. For Barcode Scanner, verify Connected to [register] and Ready for the next barcode. Scan one controlled product with the camera or paired Bluetooth/USB scanner. The code is sent to the live register and can add immediately; confirm Last Scan, product/variant feedback, and the exact item in Sell. Remove the test line before normal use.
  12. Back on the POS, expand Display Management. Confirm primary nickname, device fingerprint, Live versus Stale health, Installed/Temporary type, display mode, last seen, and any extra connected-device count. A connected badge is not enough—verify the named device and recent heartbeat.
  13. Use Refresh to recheck status without changing trust. New PIN is for a new/pending connection. Clear all calls the register/session link reset, wipes stale trust and pending joins, and then prepares a fresh pairing; it disconnects legitimate displays too, so use only with authorization.
  14. On a companion device, Disconnect ends a temporary pairing through the service. An installed ready screen offers Reset Link, which clears that device’s installed trust. After either action, verify the POS status and that the old device no longer receives cart data or sends scans.
  15. If Sale/Display reports stale or unavailable, confirm network, open register/session, correct host/register, recent last-seen, current device ID, and backend status. An installed device is tied to its trusted host checkout; it may wait when that host is inactive. Do not pair it to a different live register just to hide a host problem.
  16. Treat customer-display data as customer information. The connected display can show live cart, attached customer details, terms/signature, checkout links/QR, and sale context; keep it customer-facing, physically secure, and out of screenshots. The scanner surface can mutate the cart. Disconnect/reset retired, lost, or repurposed devices immediately.

Screen and contract reference

Control or areaWhat it means
/device launcherBranded choice between Customer Display and Barcode Scanner; it does not itself pair or select a register.
Customer DisplayLive customer-facing cart, supported customer details, terms/signature, and checkout QR experience.
Barcode ScannerCompanion scanning surface whose accepted scans add immediately to the connected Sell cart.
Open register requiredPairing PIN and live session data depend on an active register session.
Installed modeDedicated trusted device that can reconnect automatically when its linked checkout host opens the register.
Temporary modeOne-time/session-oriented device join.
Connect PINShort-lived four-digit pairing authority generated for the active session/type.
Pairing QR / Copy URLBranded URL containing PIN and mode; share only with the intended nearby device.
Display Name / device IDHuman nickname plus fingerprint suffix used to verify the request at POS approval.
Waiting for ApprovalPending device cannot view live sale until POS chooses Confirm Install/Join.
Confirm Install / Confirm JoinPOS approval binding the named pending device to the active register/session trust model.
Customer Display ReadyInstalled device is trusted but waiting for its linked checkout host/register to become active.
Live / StaleHealth derived from connected-device heartbeat/last-seen evidence.
Display ManagementShows primary device, fingerprint, type/mode, last seen, and extra-device count.
Refresh / CheckRe-reads pairing/status without intentionally clearing trust.
New PINRefreshes/creates pending pairing authority; not a device-health repair.
Clear allResets register display links and pending/trusted connections; disruptive to legitimate devices.
DisconnectEnds the current paired device connection; temporary joins call disconnect_pairing.
Reset LinkClears installed trust on the companion device.
Last ScanScanner feedback for accepted/rejected code and matched product/variant; confirm the Sell cart.
Not payment-terminal pairingCentriPay terminal devices are managed per location/register elsewhere.
No exact screenshotThe approved Amelia Grant Harbor & Hearth manifest contains no safe Connected Device pairing capture. A real image would expose an active PIN/QR/device fingerprint or customer cart, so no fabricated or live-secret screenshot is used.

Expected result

The branded device path opens the intended CentriPOS surface, pairs or signs in under authorized context, and does not expose internal service or storage URLs.

Troubleshooting

  • Use only branded pos.getcentri.com links supplied by CentriPOS.
  • Confirm the merchant, customer-safe reference, and intended recipient before continuing.
  • Ask the merchant for a new link if the page says it is unavailable or expired.

More guides

Build an itemized payment in MoneyUse Products or Amount & description to build one receipt, attach the customer, and follow the appropriate payment or service-estimate workflow.
Take a one-time payment in Virtual TerminalReview a one-time amount, tax and contact at the correct payment station, use its verified secure checkout, and recover the original receipt after an uncertain result.
Review booking payments, refunds and earned careKeep a booking’s customer payments, unused advances, completed care, cancellation fees and refunds distinct, then read a correctly scoped accrual report.
Configure booking properties and customer pagesSet accommodations, service packages, availability, required intake and payment terms, then review the correctly branded booking page before sharing it.