Customer Display is opened from the monitor icon in the operating-context bar and requires an open register session. The four-digit PIN expires after 10 minutes. Entering a PIN does not grant access by itself: the POS must approve the named device before it can view the sale.

Before you beginUse an authorized administrator account and confirm the business shown in the top bar. Record the previous value before changing a live operational setting.

Step by step

  1. On the POS, choose the monitor-shaped Customer Display control in the operating-context bar. If the control is disabled or says Customer display unavailable, open the intended register session first. Pairing belongs to that active register session.
  2. Read the status before creating anything. Connected means a display is linked and checking in; Needs approval means a device entered the PIN and awaits POS confirmation; Disconnected means no display is linked; Error means an installed or temporary display stopped checking in or the service could not be reached.
  3. If no display is connected, choose Installed for a dedicated checkout screen that should reconnect automatically with this POS host, or Temp for a one-time phone or tablet. Choose New PIN when you intentionally need a fresh four-digit code. A new code replaces the pending connection for that mode; for Temp it also disconnects the prior temporary pairing for the session.
  4. On the display device, open https://pos.getcentri.com/customer-display. Give it a recognizable Display Name, choose Install on this checkout or Temporary join to match the POS mode, then enter the four-digit Connect PIN. You can instead scan the QR shown on the POS or open the copied branded pairing URL.
  5. The display changes to Waiting for Approval. On the POS, verify the device name, device ID suffix, and requested mode, then choose Confirm Install or Confirm Join. Do not approve a device you do not recognize. The display begins receiving customer data only after this confirmation.
  6. For an installed display, leave the display device on the Customer Display Ready screen when the register is closed or the trusted checkout host is inactive. It reconnects automatically when its linked POS host opens the register. Reset Link on the display removes that device’s installed trust and requires a new install.
  7. For a temporary display, the page remembers the active pairing on that browser and sends a keepalive while open. Disconnect Display ends the display-side connection. Temporary pairings are not a substitute for installing a dedicated checkout screen.
  8. Back on the POS, expand Display Management to review the primary device name, masked device ID, Installed display or Temporary display, current display mode, Live or Stale health, last-seen time, and the count of any additional attached devices. Refresh rechecks status without erasing links.
  9. Add a harmless test item to a new sale. Confirm the display shows the intended store and register, current receipt or waiting state, customer-safe cart items and totals, and a Live indicator. Change the cart once and verify the display updates. Do not use a live payment as the first connection test.
  10. The customer display can change modes when the POS workflow requests customer information, review and signature, or completion. Treat customer edits and signatures as real sale input; verify the customer and receipt before saving or signing.
  11. Use Clear all only when you intentionally want to remove every installed link, connected temporary display, and pending join associated with the current register. It marks installed links reset, removes their trusted device assignment, disconnects pending and connected temporary pairings, then generates a fresh connection flow.
  12. After setup, close and reopen the intended register or restart the display only if that behavior is part of the business’s normal device routine. Confirm an installed display reconnects to the same checkout and does not show another register’s cart.

Screen and contract reference

Control or areaWhat it means
Customer Display controlMonitor icon in the POS context bar; enabled only for an open register session.
InstalledDedicated display trusted to the current checkout host and register so it can reconnect automatically.
TempOne-time display pairing for a spare phone or tablet.
Connect PINFour-digit code valid for 10 minutes and tied to the active register session and selected connection mode.
Pairing QR / Copy URLBranded pos.getcentri.com customer-display link containing the current PIN and mode.
Display NameHuman-readable device nickname shown to the POS before approval.
Device IDMasked suffix used with the device name to recognize the requested display.
Waiting for ApprovalThe display entered a valid PIN but cannot view the live sale until the POS confirms it.
Confirm InstallApproves and trusts the recognized display device for the checkout.
Confirm JoinApproves the recognized temporary device for the current session.
ConnectedDisplay is linked and has checked in within the health window.
Live / StaleHealth based on the display’s most recent check-in; stale means the screen has not checked in recently.
Last seenAge of the most recent device check-in.
Display modeCurrent cart, customer information, review/sign, completion, or supported scanner mode.
RefreshRechecks status and pairing without clearing trusted links.
New PINExpires the applicable pending flow and creates a new 10-minute code.
Clear allResets all installed display links and disconnects pending or connected temporary pairings for the current register.
Reset LinkDisplay-side action that removes installed trust for that device.
Disconnect DisplayEnds the current temporary display pairing and clears its browser pairing state.

Expected result

The recognized display is explicitly approved for the intended open register, reports Live in Display Management, shows the correct store, register, and current customer-safe sale state, updates after a controlled cart change, and an installed device reconnects only to its trusted checkout host.

Troubleshooting

  • Confirm you are changing the intended business and location before saving.
  • Record the previous setting when a change affects live selling, payments, tax, or integrations.
  • Use a controlled test record after saving before rolling the setting out broadly.

More guides

Build an itemized payment in MoneyUse Products or Amount & description to build one receipt, attach the customer, and follow the appropriate payment or service-estimate workflow.
Take a one-time payment in Virtual TerminalReview a one-time amount, tax and contact at the correct payment station, use its verified secure checkout, and recover the original receipt after an uncertain result.
Review booking payments, refunds and earned careKeep a booking’s customer payments, unused advances, completed care, cancellation fees and refunds distinct, then read a correctly scoped accrual report.
Configure booking properties and customer pagesSet accommodations, service packages, availability, required intake and payment terms, then review the correctly branded booking page before sharing it.