Customer Display is a live customer-facing surface scoped to an open register session and its paired host device. Installed mode establishes trusted checkout hardware; Temporary mode joins a one-time browser. Pair and approve only a device physically controlled for the intended register, keep customer information out of public view, and use destructive reset controls only when their full scope is understood.
Step by step
- Open the intended register session and confirm the business, location, and register in the information bar. The monitor control is disabled and reports Customer display unavailable until the register is open; opening a different register creates a different operating scope.
- Choose the monitor icon in the register information bar. Read the current status before generating anything: Customer display not connected is an available setup state, pending install needs POS approval, connected means at least one approved display is attached, and an error means the status service could not be read.
- Choose Installed for a dedicated store tablet/display that should retain its trusted checkout relationship, or Temp for a one-time browser connection. Switching the mode changes the kind of pairing requested; it does not convert an already connected device.
- Use the current four-digit Connect PIN or let the display device scan the QR. Copy URL copies a branded customer-display URL containing the current PIN and selected mode. The code expires after ten minutes; do not photograph, email, or publish it as a reusable register link.
- On the display device, open https://pos.getcentri.com/customer-display, enter the four digits, choose Install on this checkout or Temporary join to match the POS mode, and choose Install Display or Connect Display. Scan Pairing QR Code performs the same pairing request without manually typing the digits.
- When the display says Waiting for Approval, return to the POS. Confirm that the requested installed/temporary type and displayed device identity belong to the screen in front of you, then choose Confirm Install or Confirm Join. Check Again only polls; it does not approve the request. Cancel abandons that device-side attempt.
- For an installed device, Customer Display Ready means the device retains its checkout trust and is waiting for the linked POS host to open the expected register. Retry reloads the state. Reset Link removes that device’s installed trust and requires a new PIN and approval, so do not use it simply because no cart is active.
- Wait for Display connected at the POS. Expand Display Management and verify the primary device nickname, masked ID fingerprint, Installed display or Temporary display type, display mode, Live health, and Last seen value. When additional devices exist, the panel reports how many more are connected.
- On a healthy paired screen with no active receipt items, Waiting for your associate to start a sale is the correct idle state. Begin a controlled cart on the linked register and add one safe demo item; do not use a live payment merely to test the display.
- Verify the customer-facing merchant header and current cart. The display can show store/location/register identity, customer and fulfillment summary, line names and variants, quantities, unit prices, line totals, discounts, subtotal, savings, tax, cash rounding, and total. Staff-only notes, internal controls, and unrelated customers must not appear.
- When a customer is attached, review the account card before leaving the display customer-facing. Supported content can include contact details, balance/store-credit/credit-limit context, linked household or company accounts, recent saved receipts, receipt status and items, and whether the current receipt will enter history after saving. Expose this only to the matched customer.
- Use the customer-facing edit controls only with the customer’s participation. Supported changes can update contact fields and fulfillment address, preferred date, or preferred time. Timing is a preference rather than a guaranteed route window. After Save, verify the POS receipt/customer context reflects the intended update before continuing.
- Make one safe change at the POS and confirm the paired display updates. The live broadcast carries the active sale, line items, customer information, signature state, and display mode; the display also reloads current data when necessary. If the wrong cart or customer appears, stop use and re-pair from the correct register.
- When an eCart link exists, Open This Cart On Your Phone shows a QR that opens the branded receipt checkout on the customer’s phone. This moves payment/checkout to the eCart page; it is not the customer-display pairing QR and scanning it does not install the tablet. After completion it becomes Receipt and Next Steps for the completed sale.
- If the register requires a signature, the display shows Review and Sign with store policies and a signature pad. The customer reviews, signs, and chooses Accept & Sign. Signature on File shows the captured image; Reset clears it and can reopen a payment gate, so use Reset only to correct the current customer’s signature.
- Complete any payment through the supported POS, terminal, or customer phone workflow. The display itself shows the live receipt and checkout handoff; a QR scan or signature does not prove payment. Verify the processor result and the CentriPOS payment row before relying on the display’s completion state.
- After the controlled sale completes, verify the customer display transitions to the completed receipt/next-step state and no prior customer data remains available when the next cart begins. Close or reset the display according to store device policy before leaving a temporary or public-facing device unattended.
- Use Refresh or Check first when the POS status looks stale. New PIN creates a fresh setup code. Clear all resets every installed link and disconnects temporary or pending pairings for that register; use it only when the whole register’s display trust must be rebuilt, then pair every intended device again.
Screen and contract reference
| Control or area | What it means |
|---|---|
| Customer Display monitor | Exact Monitor icon in the register information bar; unavailable until the selected register session is open. |
| Customer display unavailable | Closed/no active register session, so pairing and management cannot proceed. |
| Customer display not connected | Open register with no approved active display. |
| Installed | Pairing mode for a dedicated trusted checkout display. |
| Temp | Pairing mode for a one-time browser display. |
| Connect PIN | Four-digit pairing code with a ten-minute lifetime. |
| Pairing QR | Encodes the same current display PIN and installed/temporary mode for device setup. |
| Copy URL | Copies the branded display launcher with current setup data; it is not a permanent public link. |
| Install on this checkout / Temporary join | Display-side choice that must match the intended pairing relationship. |
| Waiting for Approval | Valid request that still requires explicit confirmation at the POS. |
| Confirm Install / Confirm Join | POS approval for the exact pending display request. |
| Check Again | Display-side status poll; it does not grant approval. |
| Customer Display Ready | Installed trust exists, but the screen is waiting for its linked checkout host/open register. |
| Retry | Reloads the installed display state without removing trust. |
| Reset Link | Removes installed trust from that one display device. |
| Display connected | At least one approved display is attached to the current register scope. |
| Display Management | Register-level device detail and reset panel. |
| Device nickname / masked ID | Human-readable device label plus shortened fingerprint used to verify the physical request. |
| Installed display / Temporary display | Connection type of the attached device. |
| Live / Stale | Health derived from recent check-in; Stale means the device has not checked in within the supported 75-second window. |
| Last seen | Age of the latest display check-in. |
| Additional connected devices | Count beyond the primary device shown in detail. |
| Waiting for your associate to start a sale | Healthy idle display with no active cart items. |
| Customer & Fulfillment | Matched customer details, account context, and supported delivery/pickup/shipping information. |
| Account Snapshot | Linked household/company accounts and saved purchase history for the matched customer; protect it from unrelated viewers. |
| Edit contact / fulfillment | Customer-participation controls for supported profile and fulfillment preferences. |
| Your Items | Customer-safe line names, variants, quantities, unit prices, fulfillment detail, discounts, and line totals. |
| Subtotal / Savings / Tax / Cash rounding / Total | Live persisted receipt calculation presented to the customer. |
| Open This Cart On Your Phone | Receipt-specific eCart QR for continuing checkout on a phone; different from pairing QR. |
| Receipt and Next Steps | Completed-sale version of the customer phone handoff. |
| Review and Sign | Register-required policy and signature workflow. |
| Signature on File / Reset | Captured signature evidence and correction control for the current receipt. |
| Refresh / Check | Status and pairing reread that preserves trusted links. |
| New PIN | Fresh short-lived setup code for a new pairing attempt. |
| Clear all | Destructive register-level reset of all installed trust plus temporary/pending pairings. |
| No exact screenshot | The approved Amelia Grant Harbor & Hearth manifest contains no safe exact Customer Display pairing or customer-facing cart capture, so this guide intentionally uses no fabricated or unrelated image. |
Expected result
The customer sees the correct merchant identity, cart lines, totals, prompts, and payment or receipt state without staff-only notes, controls, or unrelated customer data.
Troubleshooting
- Use only branded pos.getcentri.com links supplied by CentriPOS.
- Confirm the merchant, customer-safe reference, and intended recipient before continuing.
- Ask the merchant for a new link if the page says it is unavailable or expired.
CentriPOS API explorer · API Center administration