Receive Stock uses the exact PackagePlus navigation icon and opens the direct-receipt history at /inventory/receive. That screen is specifically for product received without a purchase order. A delivery that belongs to a PO must be received from the saved purchase order instead so ordered, previously received, remaining, landed-cost, status, and short-shipment records stay connected. Both paths change inventory immediately and perform several writes; verify the result before retrying after any error.

Before you beginConfirm the location, product, variant, and unit of measure. Inventory actions create an operational audit trail and can affect availability immediately.

Step by step

  1. Count the physical delivery and identify whether it belongs to a CentriPOS purchase order. Use Inventory → Receive Stock only when it does not. For a PO delivery, use Inventory → Purchase Orders, open the exact PO, confirm its receiving location and lines, and choose Receive.
  2. On Receive Stock, read the newest-first history before posting. Desktop shows Date, Supplier, Location, Reference, Items, and Total Cost; mobile cards show the same essentials. Items is the number of receipt line rows, not the sum of all received units. The first 30 records load initially and Load more reveals 30 more.
  3. A history row is not an editable receipt-detail view: this screen has no row-open, search, filter, export, delete, recall, or correction action. View QBO Bill appears only when a later accounting link exists and opens that external bill; creating a direct receipt here does not itself present or guarantee a QBO posting.
  4. Choose New Receive. Location is required and starts from the active operating location. Supplier is optional. Reference # and Notes are optional, but use the supplier invoice or delivery-note number and a concise exception note when they are available. Verify the location before adding lines; all lines in this direct receipt post there.
  5. Search for the exact product or variant. Adding the same product-and-variant combination again increments its quantity by one; a different variant creates a separate line. Review product and variant names carefully because the editable line does not display its saved SKU.
  6. Enter a whole-number Qty and Unit Cost for every line. The browser controls suggest Qty 1 or greater and Unit Cost 0 or greater, but the current form does not provide a final validation summary. Decimal quantities are truncated, an empty or zero quantity becomes 1, and manually typed negative values are not reliably rejected by application logic. Stop and correct every value before posting.
  7. Use the trash icon to remove an unsaved direct-receipt line. Confirm the line count, total units manually, extended cost for each line, optional supplier/reference, and required location. Choose Receive Stock once; the button shows a spinner while saving.
  8. A direct receipt first creates its header and total cost, then its item rows, then applies one stock movement per line using movement type PO receive and source type stock receive. These operations are not one database transaction. The item-row insert error is not checked, and a later line can fail after earlier stock movements succeeded. If an error appears, do not submit again until history, live stock, and Inventory Movements are compared line by line.
  9. For a PO delivery, the Receive Stock dialog starts every still-receivable line at 0 and shows product/variant, SKU, Ordered, Prev, Remaining, planned location distributions, pack details when present, and a quantity field. It does not automatically assume that the remaining quantity arrived.
  10. Choose Count Sheet to print expected ordered/remaining information, or Blind Count to omit expected quantities. Both exclude costs. Scan Barcode opens the continuous camera scanner: a product barcode adds one, a configured case-pack barcode adds its units-per-pack, an unknown code shows an error, repeat scans within two seconds are ignored, and quantities are capped at Remaining. Choose Done Scanning when finished.
  11. Enter or scan the physical quantity for each line. Zero means not delivered. A value is clamped from 0 through Remaining and decimal text is parsed as a whole number. The footer totals units being received; Next remains unavailable until at least one unit is above zero.
  12. When any line is short, choose one of the three exact outcomes. Back-order remaining keeps the PO Partially Received for later. Close and create continuation PO closes this PO on received/payable quantities and creates a linked continuation PO for the remainder. Close PO as-is closes it on received/payable quantities and stops tracking the missing units on this PO. Review the listed short lines before continuing.
  13. On Receive Summary, verify PO number, supplier when present, receiving location, total units, every positive line, short badges, and the chosen remainder outcome. This summary does not display the expected date, fee calculation, or line costs. Enter the receiver’s full name, select the physical-verification attestation, and choose Confirm Receive once.
  14. PO receiving updates each positive line and applies its movement sequentially, updates average/last cost, then updates or closes the PO and may create continuation/distribution records. This is not a single all-or-nothing transaction; several update calls are not error-checked and auto-created distribution-transfer item errors can be silent. A success toast alone is insufficient for a material receipt.
  15. After either path, verify exact product/variant on-hand at the receiving location and source-linked rows in Inventory Movements. For a PO, also reopen the PO to verify received quantities, payable totals, receiver, status, continuation PO, and any requested distribution transfers. If anything differs or the save reported an error, preserve the reference and contact an authorized inventory owner before retrying. A received PO has a reason-required Recall receive workflow that deducts received stock, resets line quantities, records the recall, and permits re-receiving; the direct Receive Stock history has no equivalent recall control.
  16. No screenshot is published for this guide. The real Amelia Grant Harbor & Hearth direct-receipt history exposed supplier names, internal references, locations, item counts, and vendor cost totals, so the exact capture was rejected instead of being published, substituted, or fabricated.

Screen and contract reference

Control or areaWhat it means
PackagePlus iconExact CentriPOS navigation icon for Receive Stock.
Receive Stock routeDirect supplier receiving without a PO at /inventory/receive.
Newest-first historyDate, optional supplier, location, optional reference, receipt-line count, and total cost; 30 records per batch.
ItemsNumber of receipt line rows, not total units.
View QBO BillExternal link shown only when an accounting bill URL is already attached.
New ReceiveResets and opens a direct receipt.
Supplier (optional)Optional vendor relationship on the direct receipt.
Location *Required destination for every direct-receipt line; initialized from active location.
Reference # / NotesOptional source-document identity and internal context.
ProductsExact product/variant search; selecting an identical combination again adds one unit.
Qty / Unit CostEditable direct-receipt values with limited application-level validation; review before posting.
Direct-receipt save boundaryHeader, unchecked item-row insertion, and sequential movements are not one atomic operation.
PO Receive StockSaved-PO workflow for remaining ordered lines.
Ordered / Prev / RemainingOriginal quantity, earlier received quantity, and amount still receivable.
Count SheetPrints expected quantities without costs.
Blind CountOmits expected quantities and costs.
Scan BarcodeContinuous camera scan for product or configured case-pack barcodes, capped at Remaining.
Back-order remainingLeaves the PO Partially Received.
Close and create continuation POCloses on received/payable quantities and creates a linked remainder PO.
Close PO as-isCloses on received/payable quantities without tracking the missing units on this PO.
Receiving attestationFull name plus physical-verification checkbox required before confirmation.
Recall receiveReason-required received-PO correction that reverses stock and resets received quantities; unavailable on direct-receipt history.
No public screenshotExact Harbor & Hearth history was rejected as private financial content; no substitute is used.

Expected result

The exact direct-receipt or purchase-order path, destination location, product/variant lines, whole-unit quantities, costs, source reference, receiver, and short-shipment outcome are verified; on-hand and source-linked movement rows reconcile line by line; PO received/payable totals, status, continuation, and distribution transfers reconcile when applicable; and an uncertain or partial multi-write result is investigated before any retry.

Troubleshooting

  • Confirm the exact product variant and stock location before posting a quantity change.
  • Use the movement ledger to identify the source workflow instead of correcting history directly.
  • Avoid a manual adjustment when receiving, transfer, count, sale, or return is the correct workflow.

More guides

Build an itemized payment in MoneyUse Products or Amount & description to build one receipt, attach the customer, and follow the appropriate payment or service-estimate workflow.
Take a one-time payment in Virtual TerminalReview a one-time amount, tax and contact at the correct payment station, use its verified secure checkout, and recover the original receipt after an uncertain result.
Review booking payments, refunds and earned careKeep a booking’s customer payments, unused advances, completed care, cancellation fees and refunds distinct, then read a correctly scoped accrual report.
Configure booking properties and customer pagesSet accommodations, service packages, availability, required intake and payment terms, then review the correctly branded booking page before sharing it.